Ridgid r4513 and 4514 are both woodwork tools that you can use in the industry. Sometimes woodwork becomes hard in most cases when choosing the best tools to use in the industry. All this is because you need to figure out what you will major in for that scenario and what you do not need.
The difference between the two types of woodwork tools exists in their functions, types of features they are working with, and other features that can also make their similarities. However, with the two tools, one tool must feel superior to the other, where you need to identify the features before choosing it.
If you are a first-time worker in the woodwork industry, you can worry about which one to pick. Luckily, the article below provides the differences, similarities, FAQs, and, lastly, the conclusion that summarizes everything. I will also recommend the best tool to use among the two tools.
Quick comparison table
|comparison||Ridgid r4513||Ridgid r4514|
Differences between Ridgid r4513 and r4514
The Ridgid r4513 tool is a bit heavier than r4514 since it weighs 90.5 pounds while r4514 weighs 90 pounds. The weight difference is slight that you cannot easily identify them.
The RPM has differences such that the Ridgid r451 has a higher RPM than r4513. The RPM of r4514 is about 5000 while the RPM of r4513 is about 4000, which is lower.
The fence refers to the direction of the blade in the table saw. The fence of the r4514 is not parallel, while the fence of r4513 is parallel.
The gears of the r4514 are plastic, while the other r4513 has normal gears of any other table saw.
The cost of the two devices is slightly different; however, the cost of the r4513is a bit more reasonable than the price of r4514. All this is because the r4514 has high-quality features that come with it making it expensive. But also, that does not mean that the other device has fewer features.
The size of the tools brings a major part of the difference between them. The size of the tools, in this case, is in terms of length, width and height. The dimensions of the Ridgid r4514 are 30 inches by 41 inches by 17 inches, respectively, while the dimensions of the Ridgid r4513t are 31 inches by 24 inches by 31 inches, respectively.
Similarities of the Ridgid r4513 and r4514
- Both use the 15 amperes motor
- Both have blades of 10 inches in size.
- Both two devices are portable
- Both have the rip capacity, which is the same
- Both have the same circumference of the dust port
- Both have a cutting depth of 90 degrees which runs to three and a half inches.
- It is the most powerful table saw to use
- It is light making it portable
- It is easy to use
- It has good security features making it secure
- It’s fast and produces accurate results
- Some of its instructions are not clear
- It is innovative that it can create more features while using it
- It has a micro-bevel adjustment that helps the user adjust the measurements to the desired amount
- It has a dust port to filter dust and another particle
- It is accurate producing good results
- It has a retract rip system
- It lacks the dado throat.
Factors to consider when buying a table saw
1. Type of base
When buying a table saw or choosing the best type of table saw to use, consider checking the type of bases the table saw contains since the base helps the saw find a balance between mobility and accuracy. There are only three types of base setups that exist, which include the portable or benchtop set up, hybrid and stationary.
2. Space of the table
The space of the table determines the size of the wood that you can handle with the table. Therefore, when choosing a table saw, consider checking on the tablespace such that if the wood you are cutting is large, consider using a large table, but if the material to cut is small, you can choose a small table.
3. The capacity of the rip
The process of ripping a board refers to cutting the board in the same direction as the grain of the wood. Rip capacity refers to the distance between the saw blade and the fence, meaning that if the distance between the two is large, it shows that the boards are also large enough for ripping.
Therefore, when choosing the table saw, check on the ripping capacity to ensure the table saw is the right distance to work well with the board when cutting wood.
4. Size of the saw blade
If the size of the blade used on the miter saw and the table saw are the same, then you can interchange them and still work perfectly. Buying a table saw that has the same size as the miter helps the individual prevent you from purchasing two different sets of blades for the machine.
You might be interested to read this Quick Comparison between Ridgid R4518 and R4514
Frequently asked questions:
- Where can one purchase the devices from?
To get the devices at a good price, consider visiting Amazon shops or the eBay sites that sell their products at a discount and provide free delivery.
- Which devices can you recommend among the two devices above?
I recommend using the r4514 since it has the best qualities; however, for individuals with less cash for use, consider choosing the r4513 since their qualities are almost the same.
After having the features of the two table saws within the differences and similarities, it will be the right time for you to choose the right device for you. The article above shows the similarities and differences of the two articles that you will follow carefully to understand them.
However, if you have enough cash to purchase the r4514, then you are good to go since it has high-quality features that can work well in your industry and produce quality results for you. I recommend using the r4513 since it is portable, and you can move with it from one place to another if you lack enough cash.