Ridgid r4221 vs. R4222- Which One Is the Best

The Ridgid R4221 12 Miter Saw is a highly flexible tool that excels when it counts. It will work for everyone but the pickiest woodworkers and standard carpentry. That is the saw for you when you want a powerful and accurate saw with a huge capacity for large and little work without spending a lot of money.

The R4222 Miter Saw is a new product from RIDGID. UNLIKE OTHER BENCHTOP TOOLS, the RIDGID r4222 Saw is eligible for the Industry’s Best Lifetime Service Agreement. This 12-inch saw has a 70-degree miter capacity that is unrivaled in the industry. Users can tackle a wide range of applications with precision thanks to the 13 positive miter stops and nine positive bevel stops.

The article compares the Ridgid r4221 and the Ridgid r4222 miter saws, their features, functionalities, and how they differ from each other.

Comparison of the Ridgid r4221vs. R4222 in a table form

model Ridgid r4221 Ridgid r4222
motor 15 amperes 15 amperes
No-load speed 4000 prm 4000 prm
Blade diameter 12 in” 12 inches
Maximum cross cut 45 degrees 2  by 12 or 4 by 6 inches 2 by 12 inches
Maximum cross cot 90 degrees 2 by16 or 4 by 6 inches 2 by 16 inches
Miter capacity 70 degrees to the left and right 70 degrees to the left and right
weight 64lbs 64 pounds
warranty lifetime Lifetime service agreement
price $499 $869

Differences in features

To compare each feature and standard, we chose two well-known models from the Ridgid brand. As a result, the comparison of the Ridgid r4222 and the Ridgid r4221 will assist you in selecting the best for your needs.

1. Features of the Ridgid-R4222Ridgid r4221 vs. R4222

  1. Miter and bevel detents that can be adjusted and bypassed.
  2. Built-in dust collection port: Compatible with wet/dry vacuum adapters 1-1/4 inch in diameter.
  3. Drills that fit common stops and crown molding halts are used to mount crown stops.
  4. Blade Brake: Stops the blade to allow for faster transitions between cuts.
  5. Positive Bevel: Allows for a positive halt that may be adjusted instantly at 0°, 15°, 22.5°, 33.9°, and even 45° on both sides.
  6. Positive Miter Stops: – positive halt with quick adjustment at 0°, 15°, 22.5°, and 31.6° angles. Left and right at 45°, 60°, and 67.5° angles.

The crown stop mounting holes are to thank for the tool’s safety. Based on the enthusiasm of many users, a 70-degree miter cut saw has been in the works for quite some time.

2. Features of Ridgid r4221Features of Ridgid r4221

  • Capacity for miters and bevels

There are some unexpected features, as promised. First and foremost, Ridgid r4222 cuts a 70° meter in both directions. In a 12 x 6 cedar clapboard, the Ridgid r4222 saw will cut a 14 to 1/2 inches wide, 70 degrees bevel. It’s ideal for installing siding and trim on a 4.5 roof pitch.

Because the range is so extensive, the base’s sides must unlock and swing out of the way. It is the most popular miter range in the business. The fact that the supports can be opened to create a large 37 inches of material support is an extra advantage. When combined with the MS-UV, there is only a slight gap where your workpiece is not supported.

Another advantage of this miter capacity is that, despite its size, it is simple to store. When folded down, the rails are barely 20 degrees out of alignment with the body, so it doesn’t take up much space on your Jobsite or trailer when locked.

  • Controls

One of the things that set this saw apart is how simple it is to operate the controls. It includes positive stops for both bevels and miters at critical angles, bypassing them entirely. It will fall into the angle detent if you click it again. It just took a few minutes of practice with the saw for me to be able to maneuver it around rapidly and confidently in preparation for my next cut.

  • The cut Capacity

If you’re looking into a 12-inch slide saw, you probably have some more extensive stock to get through. Crosscut a 16/4 board up to 15 12 inches wide using the Ridgid R4221. You can go up to 12 inches broad at 45 degrees. You can cut a 45-degree angle 5-1/2 inches thick if you bevel to the left (away from the driveshaft).

To provide additional clearance for these extreme capacities, the engine is positioned at a 45-degree angle. The saw’s weight allows it to stay grounded under the wide and heavy boards that these kinds of angles are likely to need. The extra-long miter fences also make clamping large parts easier. Ridgid designed this saw to make a lot of cuts.

  • Time to Apply the Breaks

The electric blade brake is perhaps unsurprising, but it is still worth highlighting. It’s one of the nice-to-have features Ridgid could have skipped over at this pricing point but didn’t. It’s one of the features that distinguish this saw as a comprehensive tool. You’ll need a blade brake if you want to create a saw with the cut capacity.

  • Power

The 15-amp motor is fed by a 6-foot power wire, which provides all the power you need. I repeatedly used this saw-through gang-stacked 4x material and never received a complaint.

  • Accuracy

What you’re talking about when it comes to precision on a sliding miter saw is head deflection. That is, how far off my anticipated angle am I when I bring the saw out to the end of the rails?

Conclusion

The Ridgid R4221 12 Miter Saw is a highly flexible tool that excels when it counts. It will work for everyone but the pickiest woodworkers and standard carpentry. That is the saw for you when you want a powerful and accurate saw with a huge capacity for large and little work without spending a lot of money.

Finally, Ridgid is noted for having a wide choice of tool options for even the most frugal buyer. Professionals and DIYers alike can use professional-grade tools to get the job done! Ridgid miter saws will suit your needs if you fall into either of these categories.

Leave a Comment